ARGtek Default IP Address List
Instructions to find your ARGtek router's IP address

Info updated April 18, 2023

Most ARGtek routers have a default IP address of 10.10.10.254.

Pro tip: If you're already connected to the router's network you can use this tool to instantly see your ARGtek router's ip address

The IP address is required when accessing the ARGtek router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.

You can also check the instructions on how to figure out your ARGtek router ip if you are connected to the router's network.

Our readers have reported that their ARGtek router's have had the following IPs
(more common higher in list)

  • 192.168.1.1
  • 10.195.33.1
  • 192.168.2.2

To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most ARGtek routers use the same default usernames and passwords so you can also check the Default ARGtek password list to try with that one.

Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.

ARGtek default IP address List (Updated April 2023)

Model Default IP Netmask
ARG-1220
ARG-1220 default username & password
10.10.10.254   Open 255.255.255.0

Instructions and common questions

How to find out your ARGtek router gateway IP

In case you have changed your ARGtek router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)

Find ARGtek router ip on Windows

  1. Press Win + r
    A run prompt should open
  2. Type cmd into the input and press enter
    A command prompt will open
  3. Type the following into the command prompt: ipconfig | findstr /i "Gateway" and click enter.
  4. Your Default gateway, probably something like 192.168.0.1, will show

Find ARGtek router ip on Linux

  1. Open a terminal window (Shortcut on some distros: ctrl+alt+t)
  2. Type the following: ip route | grep default and press enter.
  3. You will be presented with your ARGtek router's IP address

Find ARGtek router ip on OSX

  1. Open the OSX Terminal: Finder > Applications > Utilities > Terminal
    Or you can press cmd+space and type terminal
  2. Type the following command: netstat -nr | grep default and press enter.
  3. Your ARGtek router default IP will be shown, something like 192.168.0.1