1. Home
  2. Default IP addresses
  3. WatchGuard

WatchGuard Default IP Address List
Instructions to find your WatchGuard router's IP address

Info updated Feb. 29, 2024

Most WatchGuard routers have a default IP address of 192.168.111.1.

Pro tip: If you're already connected to the router's network you can use this tool to instantly see your WatchGuard router's ip address

The IP address is required when accessing the WatchGuard router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.

You can also check the instructions on how to figure out your WatchGuard router ip if you are connected to the router's network.

Our readers have reported that their WatchGuard router's have had the following IPs
(more common higher in list)

  • 192.168.1.1
  • 192.168.0.1
  • 192.168.100.1

To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most WatchGuard routers use the same default usernames and passwords so you can also check the Default WatchGuard password list to try with that one.

Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.

WatchGuard default IP address List (Updated February 2024)

Model Default IP Netmask
AP100
AP100 default username & password 		192.168.1.1   Open 255.255.255.0
AP120
AP120 default username & password 		acquired via DHCP Find out router IP 255.255.255.0
AP200
AP200 default username & password 		192.168.1.1   Open 255.255.255.0
AP300
AP300 default username & password 		192.168.1.1   Open 255.255.255.0
FS2E5W
FS2E5W default username & password 		10.0.1.1   Open 255.255.255.0
Firebox Edge X20e-W
Firebox Edge X20e-W default username & password 		192.168.111.1   Open 255.255.255.0
Firebox Edge X20e-W / X20eW
Firebox Edge X20e-W / X20eW default username & password 		192.168.111.1   Open 255.255.255.0
Firebox Edge X55e-W
Firebox Edge X55e-W default username & password 		192.168.111.1   Open 255.255.255.0
Firebox SOHO 6 (BF4S16E5W)
Firebox SOHO 6 (BF4S16E5W) default username & password 		192.168.111.1   Open 255.255.255.0
Firebox T35-W (MS3AE5W)
Firebox T35-W (MS3AE5W) default username & password 		10.0.1.1   Open 255.255.255.0
Firebox T55-W (MS5AE5W)
Firebox T55-W (MS5AE5W) default username & password 		10.0.1.1   Open 255.255.255.0

Instructions and common questions

How to find out your WatchGuard router gateway IP

In case you have changed your WatchGuard router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)

Find WatchGuard router ip on Windows

  1. Press Win + r
    A run prompt should open
  2. Type cmd into the input and press enter
    A command prompt will open
  3. Type the following into the command prompt: ipconfig | findstr /i "Gateway" and click enter.
  4. Your Default gateway, probably something like 192.168.0.1, will show

Find WatchGuard router ip on Linux

  1. Open a terminal window (Shortcut on some distros: ctrl+alt+t)
  2. Type the following: ip route | grep default and press enter.
  3. You will be presented with your WatchGuard router's IP address

Find WatchGuard router ip on OSX

  1. Open the OSX Terminal: Finder > Applications > Utilities > Terminal
    Or you can press cmd+space and type terminal
  2. Type the following command: netstat -nr | grep default and press enter.
  3. Your WatchGuard router default IP will be shown, something like 192.168.0.1