Router infoOpenWrt supported: no
dd-wrt supported: no
RAM: 32 MiB
WiFi: 300mbps (abgn)
WAN-speed: 100mbps (10/100)
ETH-ports (LAN): 4
ETH-speed: 100mbps (10/100)
Hard reset instructions for ARGtek ARG-1220
If your ARG-1220 router is not working as it should, dropping connections or not being
responsive, you should first do a reset of the router to see if the problems persist. Other
scenarios where you might want to reset your router is if you've forgotten the password or
misconfigured it and can't get access anymore.
Your can reset your ARGtek ARG-1220 in the following way(s):
The 30-30-30 resetThere are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
- When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
- While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
- While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
Default factory settings for ARGtek ARG-1220
If you have performed a reset of your ARG-1220 device or not changed the defaults, you should be able to access it with the following settings:
Default admin username: admin
Default admin password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 10.10.10.254
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.
User Manuals for ARG-1220
Do you still have questions concerning the router that you can't find online? You can always try the manuals where most questions should be answered from the manufacturer. Below are the device manuals available for your ARG-1220.
|save User Manual (click to download)||0.76 MB||Jan. 2, 2012|