APA20
High Power 700mW Dual Band AC Wi-Fi Access Point

The Amped Wireless APA20 router has Gigabit WiFi, 5 N/A ETH-ports and 0 USB-ports.
It is also known as the Amped Wireless High Power 700mW Dual Band AC Wi-Fi Access Point.

Quick links:
Default password/Login
User Manuals


APA20 router specifications (specs)

System specs
CPU: n/a
RAM: n/a
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: n/a
WAN: None
ETH: 5 x N/A ports
USB-ports: 0

Amped Wireless APA20 review (quick overview)

Here is the quick comparison of how the Amped Wireless APA20 compares to other routers on our site:

Average 29/100
Editor 66/100
WiFi 20/100
Hardware 1/100
Current price Find best price

For a full list of routers and how they compare to the APA20, check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for Amped Wireless APA20

If your APA20 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Amped Wireless APA20 in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for Amped Wireless APA20

If you have performed a reset of your APA20 device or not changed the defaults, you should be able to access it with the following settings:

Default Network name (SSID): Amped_APA20_2.4,Amped_APA20_5.0
Default Gateway IP: 192.168.80.240 Amped Wireless login instructions
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.80.240
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.



Report error on page
(If info is incorrect)