WBMR-HP-GN print

Router info

OpenWrt supported: no
dd-wrt supported: no
Flash: n/a
WiFi: 300mbps (bgn)
WAN-speed: N/A ()
ETH-ports (LAN): 4
ETH-speed: 100mbps (10/100)
USB-ports: no

Hard reset instructions for Buffalo WBMR-HP-GN

With the reset button

  1. Have the router plugged in and powered on
  2. Press and hold the reset button for 10 seconds until DIAG led start shining red
  3. Wait for DIAG led to turn off again.

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
This process usually works for resetting any router to it's factory setting.

Default factory settings for Buffalo WBMR-HP-GN

Default Network name (SSID): XXXXXXXXXXXX
Default Gateway IP:
Default admin username: root
Default subnet mask:
Default DNS server:

User Manuals for WBMR-HP-GN

Name Type Size Date
save Manual (click to download) pdf 0.9 MB April 10, 2009
Cookies disclaimer

I agree Our site saves small pieces of text information (cookies) on your device in order to deliver better content and for statistical purposes. You can disable the usage of cookies by changing the settings of your browser. By browsing our website without changing the browser settings you grant us permission to store that information on your device.