router ESR350H print

Router info

OpenWrt supported: no
dd-wrt supported: no
Cpu: 400 MHz
RAM: 16 MiB
Flash: 4 MiB
WiFi: 300mbps (bgn)
WAN-ports: 1
WAN-speed: Gigabit (10/100/1000)
ETH-ports (LAN): 4
ETH-speed: Gigabit (10/100/1000)
USB-ports: 0
Other versions (newest first):
  • ESR350 (2014)
  • Hard reset instructions for EnGenius ESR350H

    If your ESR350H router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
    Your can reset your EnGenius ESR350H in the following way(s):

    Through the web interface

    1. Open a web browser and go to the address of the router (check default settings below)
    2. Sign in with your username/password, if unchanged check default settings below
    3. Locate Management in the menu and click it
    4. Click on Configure
    5. On the Configure page click on the Reset button, if prompted click Ok
    6. Wait for router to reboot

    With the reset button

    1. Have the router plugged in and turned on
    2. Locate the reset button (it's usually labeled reset or RESET/WPS)
    3. With a sharp object, for example a paperclip, press and hold the reset button for at least 11 seconds
    4. When the POWER led starts blinking release the reset button
    5. Wait for the router to reboot.

    The 30-30-30 reset

    If the above instructions don't work you can always try the 30-30-30 reset as follows:
    1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
    2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
    3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

    This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.
    Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

    Default factory settings for EnGenius ESR350H

    If you have performed a reset of your ESR350H device or not changed the defaults, you should be able to access it with the following settings:

    Default Gateway IP: 192.168.0.1
    Default admin username: admin
    Default admin password: admin
    Default subnet mask: 255.255.255.0
    Default DNS server: 192.168.0.1
    Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

    User Manuals for ESR350H

    Do you still have questions concerning the router that you can't find online? You can always try the manuals where most questions should be answered from the manufacturer. Below are the device manuals available for your ESR350H.

    Name Type Size Date
    save User Manual (click to download) pdf 3.23 MB Jan. 31, 2013