Almond (2014)
Wireless N Touchscreen Router and Range Extender

The Securifi Almond (2014) router has 300mbps WiFi, 2 100mbps ETH-ports and 0 USB-ports.
It is also known as the Securifi Wireless N Touchscreen Router and Range Extender.

Quick links:
Default password/Login
User Manuals



Almond (2014) router specifications (specs)

System specs
CPU: 580 MHz
RAM: 128 MiB
Flash: 32 MiB
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands: 2.4GHz
WiFi throughput: n/a
WAN: 1 x 100mbps port
ETH: 2 x 100mbps ports
USB-ports: 0

Securifi Almond review (quick overview)

Here is the quick comparison of how the Securifi Almond compares to other routers on our site:

Average 34/100
Editor 80/100
WiFi 6/100
Hardware 18/100
Current price Find best price

For a full list of routers and how they compare to the Almond (2014), check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for Securifi Almond (2014)

If your Almond (2014) router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Securifi Almond (2014) in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for Securifi Almond (2014)

If you have performed a reset of your Almond (2014) device or not changed the defaults, you should be able to access it with the following settings:

Default subnet mask: 255.255.255.0

Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

Almond (2014) Firmwares

Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Securifi Almond (2014):

Securifi stock firmware for the Almond (2014)

Stock firmwares for the Almond (2014) are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.




Report error on page
(If info is incorrect)