TEW-828DRU V1.0R
AC3200 Tri-Band Wireless Router

The TRENDnet TEW-828DRU V1.0R router has Gigabit WiFi, 4 N/A ETH-ports and 0 USB-ports.
It is also known as the TRENDnet AC3200 Tri-Band Wireless Router.

The TEW-828DRU V1.0R is featured in our
Best Low-end routers: buying guide

Quick links:
Default password/Login
Login instructions
User Manuals


TEW-828DRU V1.0R router specifications (specs)

System specs
CPU: 1 GHz
RAM: 256 MiB
Flash: 128 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: n/a
WAN: 1 x N/A port
ETH: 4 x N/A ports
USB-ports: 0

TRENDnet TEW-828DRU review (quick overview)

Here is the quick comparison of how the TRENDnet TEW-828DRU compares to other routers on our site:

Average 46/100
Editor 76/100
WiFi 20/100
Hardware 42/100
Current price Find best price

For a full list of routers and how they compare to the TEW-828DRU V1.0R, check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for TRENDnet TEW-828DRU V1.0R

If your TEW-828DRU V1.0R router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your TRENDnet TEW-828DRU V1.0R in the following way(s):

With the reset button

  1. Have the unit plugged in and powered on
  2. Press and hold the reset button for 15 seconds (use a sharp pencil or a paperclip)
  3. Wait for the router to reboot

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for TRENDnet TEW-828DRU V1.0R

If you have performed a reset of your TEW-828DRU V1.0R device or not changed the defaults, you should be able to access it with the following settings:

Default Network name (SSID): TRENDnet828_2.4GHz_XYXYXYX,TRENDnet828_5GHz_XYXYXYX
Default Gateway IP: 192.168.10.1 TRENDnet login instructions
Default username: admin TRENDnet router default password list
Default password: ''randomly generated'' 
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.10.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

How to login to the TEW-828DRU V1.0R

To login to the AC3200 Tri-Band Wireless Router and change the settings, you can follow these steps:

  1. Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
  2. Open your browser and visit http://192.168.10.1
  3. You should be prompted with a login dialogue.
  4. Enter the username: admin and the password ''randomly generated''
    Note: If you have already changed the password use that instead.
  5. You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.

If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common TRENDnet credentials, as they can usually be shared across models/variants.




Report error on page
(If info is incorrect)