My Net N900 Central (2TB)

The Western Digital My Net N900 Central (2TB) router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports.

Quick links:
Default password/Login
Login instructions
User Manuals



My Net N900 Central (2TB) router specifications (specs)

System specs
CPU: 600 MHz
RAM: 256 MiB
Flash: 16 MiB
Custom firmwares: None
Connectivity
WiFi: 300mbps (abgn)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: n/a
WAN: 1 x Gigabit port
ETH: 4 x Gigabit ports
USB-ports: 0

Western Digital My Net N900 review (quick overview)

Here is the quick comparison of how the Western Digital My Net N900 compares to other routers on our site:

Average 34/100
Editor 76/100
WiFi 6/100
Hardware 21/100
Current price $126.67

For a full list of routers and how they compare to the My Net N900 Central (2TB), check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for Western Digital My Net N900 Central (2TB)

If your My Net N900 Central (2TB) router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Western Digital My Net N900 Central (2TB) in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for Western Digital My Net N900 Central (2TB)

If you have performed a reset of your My Net N900 Central (2TB) device or not changed the defaults, you should be able to access it with the following settings:

Default Network name (SSID): WesternDigital
Default Gateway IP: 192.168.1.1 Western Digital login instructions
Default username: admin Western Digital router default password list
Default password: password 
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

How to login to the My Net N900 Central (2TB)

To login to the My Net N900 Central (2TB) router and change the settings, you can follow these steps:

  1. Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
  2. Open your browser and visit http://192.168.1.1
  3. You should be prompted with a login dialogue.
  4. Enter the username: admin and the password password
    Note: If you have already changed the password use that instead.
  5. You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.

If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common Western Digital credentials, as they can usually be shared across models/variants.


My Net N900 Central (2TB) Firmwares

Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Western Digital My Net N900 Central (2TB):

Western Digital stock firmware for the My Net N900 Central (2TB)

Stock firmwares for the My Net N900 Central (2TB) are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.




Report error on page
(If info is incorrect)