5354
N300 DOCSIS 3.0 Cable Modem/Router

The Zoom 5354 router has 300mbps WiFi, 4 N/A ETH-ports and 0 USB-ports.
It is also known as the Zoom N300 DOCSIS 3.0 Cable Modem/Router.

Quick links:
Default password/Login
User Manuals


5354 router specifications (specs)

System specs
CPU: n/a
RAM: n/a
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands: 2.4GHz
WiFi throughput: n/a
WAN: None
ETH: 4 x N/A ports
USB-ports: 0

Zoom 5354 review (quick overview)

Here is the quick comparison of how the Zoom 5354 compares to other routers on our site:

Average 24/100
Editor 67/100
WiFi 6/100
Hardware 1/100
Current price Find best price

For a full list of routers and how they compare to the 5354, check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for Zoom 5354

If your 5354 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Zoom 5354 in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for Zoom 5354

If you have performed a reset of your 5354 device or not changed the defaults, you should be able to access it with the following settings:

Default subnet mask: 255.255.255.0

Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

5354 Firmwares

Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Zoom 5354:

Zoom stock firmware for the 5354

Stock firmwares for the 5354 are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.




Report error on page
(If info is incorrect)