router ADSL Modem / Router w/ Wireless-N, Series 1093 print Zoom ADSL Modem/Router w/ Wireless-N

The Zoom ADSL Modem / Router w/ Wireless-N, Series 1093 router has Gigabit WiFi, 4 100mbps ETH-ports and 0 USB-ports.
It's also known as the Zoom Zoom ADSL Modem/Router w/ Wireless-N.

Quick links:
Default password/Login
User Manuals

ADSL Modem / Router w/ Wireless-N, Series 1093 router specifications (specs)

System specs
CPU: n/a
RAM: n/a
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: Gigabit (bgn)
WiFi bands: 2.4GHz
WiFi throughput: n/a
WAN: None
ETH: 4 100mbps ports
USB-ports: 0

Hard reset instructions for Zoom ADSL Modem / Router w/ Wireless-N, Series 1093

If your ADSL Modem / Router w/ Wireless-N, Series 1093 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Zoom ADSL Modem / Router w/ Wireless-N, Series 1093 in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.
Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for Zoom ADSL Modem / Router w/ Wireless-N, Series 1093

If you have performed a reset of your ADSL Modem / Router w/ Wireless-N, Series 1093 device or not changed the defaults, you should be able to access it with the following settings:

Default Network name (SSID): zoom
Default Gateway IP: 192.168.1.1 Zoom login instructions
Default username: admin Zoom router default password list
Default password: zoomadsl 
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

User Manuals for ADSL Modem / Router w/ Wireless-N, Series 1093

Do you still have questions concerning the router that you can't find online? You can always try the manuals where most questions should be answered from the manufacturer. Below are the device manuals available for your ADSL Modem / Router w/ Wireless-N, Series 1093.

Name Type Size Date
save User Manual (click to download) pdf 482.27 kB Sept. 28, 2011

ADSL Modem / Router w/ Wireless-N, Series 1093 Firmwares

Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Zoom ADSL Modem / Router w/ Wireless-N, Series 1093:

Zoom stock firmware for the ADSL Modem / Router w/ Wireless-N, Series 1093

Stock firmwares for the ADSL Modem / Router w/ Wireless-N, Series 1093 are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.