HiveAP 350

The Aerohive HiveAP 350 router has 300mbps WiFi, 2 N/A ETH-ports and 0 USB-ports.

Quick links:
Default password/Login
Login instructions
User Manuals


HiveAP 350 router specifications (specs)

System specs
CPU: 533 MHz
RAM: 256 MiB
Flash: 64 MiB
Custom firmwares: OpenWrt
Connectivity
WiFi: 300mbps (abgn)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: n/a
WAN: None
ETH: 2 x N/A ports
USB-ports: 0

Hard reset instructions for Aerohive HiveAP 350

If your HiveAP 350 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Aerohive HiveAP 350 in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for Aerohive HiveAP 350

If you have performed a reset of your HiveAP 350 device or not changed the defaults, you should be able to access it with the following settings:

Default Network name (SSID): AH-XYXYXYXYXYXY_ac
Default Gateway IP: acquired via DHCP Aerohive login instructions
Default username: admin Aerohive router default password list
Default password: aerohive 
Default subnet mask: 255.255.255.0
Default DNS server: acquired via DHCP
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

How to login to the HiveAP 350

To login to the HiveAP 350 router and change the settings, you can follow these steps:

  1. Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
  2. Find out your routers IP address with the WhatsMyRouterIp.com IP finder
  3. Type the router IP in the browser address field and press enter, e.g. http://192.168.0.1
  4. You should be prompted with a login dialogue.
  5. Enter the username: admin and the password aerohive
    Note: If you have already changed the password use that instead.
  6. You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.

If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common Aerohive credentials, as they can usually be shared across models/variants.




Report error on page
(If info is incorrect)