WLI-TX4-AG300N
Buffalo AirStation Nfiniti Dual Band Wireless-N Ethernet Converter

The Buffalo WLI-TX4-AG300N router has 300mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
It's also known as the Buffalo Buffalo AirStation Nfiniti Dual Band Wireless-N Ethernet Converter.

Quick links:
Default password/Login
User Manuals


WLI-TX4-AG300N router specifications (specs)

System specs
CPU: n/a
RAM: 32 MiB
Flash: 4 MiB
Custom firmwares: OpenWrt
Connectivity
WiFi: 300mbps (abgn)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: n/a
WAN: None
ETH: 4 x 100mbps ports
USB-ports: 0

Hard reset instructions for Buffalo WLI-TX4-AG300N

If your WLI-TX4-AG300N router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Buffalo WLI-TX4-AG300N in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for Buffalo WLI-TX4-AG300N

If you have performed a reset of your WLI-TX4-AG300N device or not changed the defaults, you should be able to access it with the following settings:

Default Gateway IP: 1.1.1.1 Buffalo login instructions
Default username: root Buffalo router default password list
Default password: blank 
Default subnet mask: 255.255.255.0
Default DNS server: 1.1.1.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

User Manuals for WLI-TX4-AG300N

Do you still have questions concerning the router that you can't find online? You can always try the manuals where most questions should be answered from the manufacturer. Below are the device manuals available for your WLI-TX4-AG300N.

Name Type Size Date
Manual (click to download) pdf 1.11 MB Jan. 19, 2009



Report error on page
(If info is incorrect)