DIR-895L rev A1
Wireless AC5300 Ultra Wi-Fi Router

The D-Link DIR-895L rev A1 router has Gigabit WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
It has a total combined WiFi throughput of 5300 Mpbs.
It's also known as the D-Link Wireless AC5300 Ultra Wi-Fi Router.

Quick links:
Default password/Login
User Manuals


DIR-895L rev A1 router specifications (specs)

System specs
CPU: 1.4 GHz
RAM: 256 MiB
Flash: 128 MiB + 32 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: 5300 Mpbs
WAN: 1 x Gigabit port
ETH: 4 x Gigabit ports
USB-ports: 0

Hard reset instructions for D-Link DIR-895L rev A1

If your DIR-895L rev A1 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your D-Link DIR-895L rev A1 in the following way(s):

With the reset button

  1. Locate the reset button on the back off the router
  2. While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
  3. Hold the button pressed for 10 seconds, then release.
  4. The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
  5. You can now setup your router again through the user interface

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for D-Link DIR-895L rev A1

If you have performed a reset of your DIR-895L rev A1 device or not changed the defaults, you should be able to access it with the following settings:

Default Gateway IP: 192.168.0.1 D-Link login instructions
Default username: Admin D-Link router default password list
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

User Manuals for DIR-895L rev A1

Do you still have questions concerning the router that you can't find online? You can always try the manuals where most questions should be answered from the manufacturer. Below are the device manuals available for your DIR-895L rev A1.

Name Type Size Date
User Manual (click to download) pdf 5.53 MB May 26, 2015



Report error on page
(If info is incorrect)