MV2400

The Magnadyne MV2400 router has 300mbps WiFi, ETH-ports and 0 USB-ports.

Quick links:
Default password/Login
User Manuals


MV2400 router specifications (specs)

System specs
CPU: 560 MHz
RAM: 64 MiB
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands: 2.4GHz
WiFi throughput: n/a
WAN: 1 x 100mbps port
ETH: None
USB-ports: 0

Hard reset instructions for Magnadyne MV2400

If your MV2400 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Magnadyne MV2400 in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for Magnadyne MV2400

If you have performed a reset of your MV2400 device or not changed the defaults, you should be able to access it with the following settings:

Default Network name (SSID): MV2400-2.4G
Default Gateway IP: 192.168.10.1 Magnadyne login instructions
Default password: admin 
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.10.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.



Report error on page
(If info is incorrect)