R7300DST
AC1900 Nighthawk DST Router & DST Adapter

The Netgear R7300DST router has Gigabit WiFi, 4 N/A ETH-ports and 0 USB-ports.
It is also known as the Netgear AC1900 Nighthawk DST Router & DST Adapter.

The R7300DST is featured in our
Best Low-end routers: buying guide

Quick links:
Default password/Login
Login instructions
User Manuals


R7300DST router specifications (specs)

System specs
CPU: 1 GHz
RAM: 256 MiB
Flash: 128 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: n/a
WAN: 1 x N/A port
ETH: 4 x N/A ports
USB-ports: 0

Netgear R7300 review (quick overview)

Here is the quick comparison of how the Netgear R7300 compares to other routers on our site:

Average 46/100
Editor 78/100
WiFi 20/100
Hardware 42/100
Current price Find best price

For a full list of routers and how they compare to the R7300DST, check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for Netgear R7300DST

If your R7300DST router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Netgear R7300DST in the following way(s):

With the reset button

  1. Have the router powered on (if just booted wait around one minute for it to load)
  2. With a sharp pen or paper clip, press down the Restore Factory Settings button and hold it for about 7 seconds
  3. When the power light starts to blink you can release the reset button and wait for the router to start up
  4. The power light will be solid (not blinking) once the router is started.

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for Netgear R7300DST

If you have performed a reset of your R7300DST device or not changed the defaults, you should be able to access it with the following settings:

Default Gateway IP: http://www.routerlogin.net Netgear login instructions
Default username: admin Netgear router default password list
Default password: password 
Default subnet mask: 255.255.255.0
Default DNS server: http://www.routerlogin.net
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

How to login to the R7300DST

To login to the AC1900 Nighthawk DST Router & DST Adapter and change the settings, you can follow these steps:

  1. Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
  2. Open your browser and visit http://www.routerlogin.net
  3. You should be prompted with a login dialogue.
  4. Enter the username: admin and the password password
    Note: If you have already changed the password use that instead.
  5. You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.

If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common Netgear credentials, as they can usually be shared across models/variants.


R7300DST Firmwares

Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Netgear R7300DST:

Netgear stock firmware for the R7300DST

Stock firmwares for the R7300DST are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.




Report error on page
(If info is incorrect)