WNDAP620
ProSafe 3x3 Single Radio, Dual Band Wireless-N Access Point

The Netgear WNDAP620 router has 300mbps WiFi, 1 Gigabit ETH-ports and 0 USB-ports.
It is also known as the Netgear ProSafe 3x3 Single Radio, Dual Band Wireless-N Access Point.

Quick links:
Default password/Login
Login instructions
User Manuals


WNDAP620 router specifications (specs)

System specs
CPU: 1 GHz
RAM: 128 MiB
Flash: 32 MiB
Custom firmwares: None
Connectivity
WiFi: 300mbps (abgn)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: n/a
WAN: None
ETH: 1 x Gigabit port
USB-ports: 0

Hard reset instructions for Netgear WNDAP620

If your WNDAP620 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Netgear WNDAP620 in the following way(s):

With the reset button

  1. Have the router powered on (if just booted wait around one minute for it to load)
  2. With a sharp pen or paper clip, press down the Restore Factory Settings button and hold it for about 7 seconds
  3. When the power light starts to blink you can release the reset button and wait for the router to start up
  4. The power light will be solid (not blinking) once the router is started.

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for Netgear WNDAP620

If you have performed a reset of your WNDAP620 device or not changed the defaults, you should be able to access it with the following settings:

Default Gateway IP: 192.168.0.100 Netgear login instructions
Default username: admin Netgear router default password list
Default password: password 
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.100
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

How to login to the WNDAP620

To login to the ProSafe 3x3 Single Radio, Dual Band Wireless-N Access Point and change the settings, you can follow these steps:

  1. Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
  2. Open your browser and visit http://192.168.0.100
  3. You should be prompted with a login dialogue.
  4. Enter the username: admin and the password password
    Note: If you have already changed the password use that instead.
  5. You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.

If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common Netgear credentials, as they can usually be shared across models/variants.


User Manuals for WNDAP620

Do you still have questions concerning the router that you can't find online? You can always try the manuals where most questions should be answered from the manufacturer. Below are the device manuals available for your WNDAP620.

Name Type Size Date
User Manual pt 2 (click to download) pdf 18.47 kB Nov. 30, 2015
User Manual - Statements.pdf (click to download) pdf 19.73 kB June 29, 2012
User Manual.pdf (click to download) pdf 360.53 kB June 22, 2012
User Manual rev.pdf (click to download) pdf 375.79 kB Oct. 12, 2015
UserMan (click to download) pdf 390.58 kB Oct. 1, 2014
User Manual pt 1 (click to download) pdf 0.94 MB Sept. 13, 2012



Report error on page
(If info is incorrect)