Vektor 3600-AC (AEFME904U1)

The Nexxt Solutions Vektor 3600-AC (AEFME904U1) router has Gigabit WiFi, 1 100mbps ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1200 Mpbs.

Quick links:
Default password/Login
User Manuals


Vektor 3600-AC (AEFME904U1) router specifications (specs)

System specs
CPU: 600 MHz
RAM: 64 MiB
Flash: 8 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: 1200 Mpbs
WAN: 1 x 100mbps port
ETH: 1 x 100mbps port
USB-ports: 0

Hard reset instructions for Nexxt Solutions Vektor 3600-AC (AEFME904U1)

If your Vektor 3600-AC (AEFME904U1) router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Nexxt Solutions Vektor 3600-AC (AEFME904U1) in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for Nexxt Solutions Vektor 3600-AC (AEFME904U1)

If you have performed a reset of your Vektor 3600-AC (AEFME904U1) device or not changed the defaults, you should be able to access it with the following settings:

Default Network name (SSID): VEKTOR_XXXX
Default subnet mask: 255.255.255.0

Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

User Manuals for Vektor 3600-AC (AEFME904U1)

Do you still have questions concerning the router that you can't find online? You can always try the manuals where most questions should be answered from the manufacturer. Below are the device manuals available for your Vektor 3600-AC (AEFME904U1).

Name Type Size Date
User manual (click to download) pdf 37.09 kB April 27, 2018
15_AEFME904U1 UserMan (click to download) pdf 337.9 kB Dec. 29, 2018



Report error on page
(If info is incorrect)