CPE210 v2.x
2.4GHz 300Mbps 9dBi Outdoor CPE

The TP-LINK CPE210 v2.x router has 300mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.
It is also known as the TP-LINK 2.4GHz 300Mbps 9dBi Outdoor CPE.

Quick links:
Default password/Login
User Manuals



CPE210 v2.x router specifications (specs)

System specs
CPU: 650 MHz
RAM: 64 MiB
Flash: 8 MiB
Custom firmwares: OpenWrt
Connectivity
WiFi: 300mbps (bgn)
WiFi bands: 2.4GHz
WiFi throughput: n/a
WAN: None
ETH: 1 x 100mbps port
USB-ports: 0

TP-LINK CPE210 review (quick overview)

Here is the quick comparison of how the TP-LINK CPE210 compares to other routers on our site:

Average 34/100
Editor 84/100
WiFi 6/100
Hardware 14/100
Current price $34.99

For a full list of routers and how they compare to the CPE210 v2.x, check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for TP-LINK CPE210 v2.x

If your CPE210 v2.x router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your TP-LINK CPE210 v2.x in the following way(s):

Through the web interface

    1. Open a browser and navigate to the web interface of the router (check default settings below)
    2. In the menu look for System tools and under there find the Factory defaults option
    3. On the Factory defaults page click on the Restore button to perform the reset.

    Withe the RESET/WPS button

    1. Have the unit powered on
    2. Press and hold the reset (sometimes reset/WPS) button for 10 seconds with a paperclip or other sharp object.
    3. When the SYS led start blinking quickly release the reset button and wait for router to boot back up.

    The 30-30-30 reset

    If the above instructions don't work you can always try the 30-30-30 reset as follows:
    1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
    2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
    3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

    This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

    Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


    Default factory settings for TP-LINK CPE210 v2.x

    If you have performed a reset of your CPE210 v2.x device or not changed the defaults, you should be able to access it with the following settings:

    Default subnet mask: 255.255.255.0

    Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.



    Report error on page
    (If info is incorrect)