TPL-111BR
125Mbps 802.11g Wireless Powerline Router

The TRENDnet TPL-111BR router has 54mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
It is also known as the TRENDnet 125Mbps 802.11g Wireless Powerline Router.

Quick links:
Default password/Login
Login instructions
User Manuals


TPL-111BR router specifications (specs)

System specs
CPU: n/a
RAM: 8 MiB
Flash: 2 MiB
Custom firmwares: None
Connectivity
WiFi: 54mbps (bg)
WiFi bands: 2.4GHz
WiFi throughput: n/a
WAN: 1 x 100mbps port
ETH: 4 x 100mbps ports
USB-ports: 0

Hard reset instructions for TRENDnet TPL-111BR

If your TPL-111BR router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your TRENDnet TPL-111BR in the following way(s):

With the reset button

  1. Have the unit plugged in and powered on
  2. Press and hold the reset button for 15 seconds (use a sharp pencil or a paperclip)
  3. Wait for the router to reboot

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for TRENDnet TPL-111BR

If you have performed a reset of your TPL-111BR device or not changed the defaults, you should be able to access it with the following settings:

Default Network name (SSID): default
Default Gateway IP: 10.0.0.2 TRENDnet login instructions
Default username: admin TRENDnet router default password list
Default password: adminĀ 
Default subnet mask: 255.255.255.0
Default DNS server: 10.0.0.2
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

How to login to the TPL-111BR

To login to the 125Mbps 802.11g Wireless Powerline Router and change the settings, you can follow these steps:

  1. Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
  2. Open your browser and visit http://10.0.0.2
  3. You should be prompted with a login dialogue.
  4. Enter the username: admin and the password admin
    Note: If you have already changed the password use that instead.
  5. You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.

If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common TRENDnet credentials, as they can usually be shared across models/variants.


TPL-111BR Firmwares

Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the TRENDnet TPL-111BR:

TRENDnet stock firmware for the TPL-111BR

Stock firmwares for the TPL-111BR are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.




Report error on page
(If info is incorrect)