TPL-306E
200Mbps Compact Powerline AV Adapter

The TRENDnet TPL-306E router has No WiFi, 1 100mbps ETH-ports and 0 USB-ports.
It is also known as the TRENDnet 200Mbps Compact Powerline AV Adapter.

Quick links:
Default password/Login


TPL-306E router specifications (specs)

System specs
CPU: n/a
RAM: n/a
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: No ()
WiFi bands: n/a
WiFi throughput: n/a
WAN: None
ETH: 1 x 100mbps port
USB-ports: 0

Hard reset instructions for TRENDnet TPL-306E

If your TPL-306E router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your TRENDnet TPL-306E in the following way(s):

With the reset button

  1. Have the unit plugged in and powered on
  2. Press and hold the reset button for 15 seconds (use a sharp pencil or a paperclip)
  3. Wait for the router to reboot

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for TRENDnet TPL-306E

If you have performed a reset of your TPL-306E device or not changed the defaults, you should be able to access it with the following settings:

Default subnet mask: 255.255.255.0

Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.



Report error on page
(If info is incorrect)