We3G, Series 1086 (Model 4520)

The Zoom We3G, Series 1086 (Model 4520) router has 54mbps WiFi, N/A ETH-ports and 0 USB-ports.

Quick links:
Default password/Login
User Manuals


We3G, Series 1086 (Model 4520) router specifications (specs)

System specs
CPU: 528 MHz
RAM: n/a
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: 54mbps (bg)
WiFi bands: 2.4GHz
WiFi throughput: n/a
WAN: None
ETH: None
USB-ports: 0

Hard reset instructions for Zoom We3G, Series 1086 (Model 4520)

If your We3G, Series 1086 (Model 4520) router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Zoom We3G, Series 1086 (Model 4520) in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for Zoom We3G, Series 1086 (Model 4520)

If you have performed a reset of your We3G, Series 1086 (Model 4520) device or not changed the defaults, you should be able to access it with the following settings:

Default Network name (SSID): ZoomWe3G_XXX
Default Gateway IP: 192.168.1.1 Zoom login instructions
Default password: admin 
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

User Manuals for We3G, Series 1086 (Model 4520)

Do you still have questions concerning the router that you can't find online? You can always try the manuals where most questions should be answered from the manufacturer. Below are the device manuals available for your We3G, Series 1086 (Model 4520).

Name Type Size Date
User Manual (click to download) pdf 492.83 kB Nov. 16, 2010

We3G, Series 1086 (Model 4520) Firmwares

Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Zoom We3G, Series 1086 (Model 4520):

Zoom stock firmware for the We3G, Series 1086 (Model 4520)

Stock firmwares for the We3G, Series 1086 (Model 4520) are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.




Report error on page
(If info is incorrect)