Alcatel-Lucent Default IP Address List
Instructions to find your Alcatel-Lucent router's IP address

Info updated Sept. 24, 2020

Most Alcatel-Lucent routers have a default IP address of

Pro tip: If you're already connected to the router's network you can use this tool to instantly see your Alcatel-Lucent router's ip address

The IP address is required when accessing the Alcatel-Lucent router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.

You can also check the instructions on how to figure out your Alcatel-Lucent router ip if you are connected to the router's network.

Our readers have reported that their Alcatel-Lucent router's have had the following IPs
(more common higher in list)


To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most Alcatel-Lucent routers use the same default usernames and passwords so you can also check the Default Alcatel-Lucent password list to try with that one.

Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.

Alcatel-Lucent default IP address List (Valid September 2020)

Model Default IP Netmask
CellPipe 7130 RG 5Ae.A2010
CellPipe 7130 RG 5Ae.A2010 default username & password   Open
RG200E-CA (China Telecom)
RG200E-CA (China Telecom) default username & password   Open

Instructions and common questions

How to find out your Alcatel-Lucent router gateway IP

In case you have changed your Alcatel-Lucent router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)

Find Alcatel-Lucent router ip on Windows

  1. Press Win + r
    A run prompt should open
  2. Type cmd into the input and press enter
    A command prompt will open
  3. Type the following into the command prompt: ipconfig | findstr /i "Gateway" and click enter.
  4. Your Default gateway, probably something like, will show

Find Alcatel-Lucent router ip on Linux

  1. Open a terminal window (Shortcut on some distros: ctrl+alt+t)
  2. Type the following: ip route | grep default and press enter.
  3. You will be presented with your Alcatel-Lucent router's IP address

Find Alcatel-Lucent router ip on OSX

  1. Open the OSX Terminal: Finder > Applications > Utilities > Terminal
    Or you can press cmd+space and type terminal
  2. Type the following command: netstat -nr | grep default and press enter.
  3. Your Alcatel-Lucent router default IP will be shown, something like