Beeline Default IP Address List
Info updated June 12, 2019
Instructions to find your Beeline router's IP address
Most Beeline routers have a default IP address of 192.168.1.1.
The IP address
is required when accessing the
Beeline router's web interface
to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.
You can also check the instructions on how to figure out your Beeline router ip if you are connected to the router's network.
To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most Beeline routers use the same default usernames and passwords so you can also check the Default Beeline password list to try with that one.
Beeline default IP address List (Valid June 2019)
SmartBox default username & password
SmartBox One default username & password
SmartBox One v2
SmartBox One v2 default username & password
SmartBox Pro default username & password
SmartBox TURBO+ default username & password
Instructions and common questions
How to find out your Beeline router gateway IP
In case you have changed your Beeline router's default IP address and can't remember it you can find it
out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)
Find Beeline router ip on Windows
Press Win + r
A run prompt should open
cmdinto the input and press enter
A command prompt will open
Type the following into the command prompt:
ipconfig | findstr /i "Gateway"and click enter.
- Your Default gateway, probably something like 192.168.0.1, will show
Find Beeline router ip on Linux
- Open a terminal window (Shortcut on some distros: ctrl+alt+t)
Type the following:
ip route | grep defaultand press enter.
- You will be presented with your Beeline router's IP address
Find Beeline router ip on OSX
Open the OSX Terminal: Finder > Applications > Utilities > Terminal
Or you can press cmd+space and type terminal
Type the following command:
netstat -nr | grep defaultand press enter.
- Your Beeline router default IP will be shown, something like 192.168.0.1