Dane-Elec Default IP Address ListInfo updated Aug. 15, 2018
Most Dane-Elec routers have a default
IP address of 192.168.1.2.
The IP address is required when accessing the Dane-Elec router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.
You can also check the instructions on how to figure out your Dane-Elec router ip if you're connected to the router's network, or use the following tool to automatically find your Dane-Elec router's ip address .
To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most Dane-Elec routers use the same default usernames and passwords so you can also check the Default Dane-Elec password list to try with that one.Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.
Dane-Elec default IP address List (Valid August 2018)
Media Streamer default username & password
Instructions and common questions
How to find out your Dane-Elec router gateway IP
In case you have changed your Dane-Elec router's default IP address and can't remember it you can find it
out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)
Find Dane-Elec router ip on Windows
Press Win + r
A run prompt should open
cmdinto the input and press enter
A command prompt will open
Type the following into the command prompt:
ipconfig | findstr /i "Gateway"and click enter.
- Your Default gateway, probably something like 192.168.0.1, will show
Find Dane-Elec router ip on Linux
- Open a terminal window (Shortcut on some distros: ctrl+alt+t)
Type the following:
ip route | grep defaultand press enter.
- You will be presented with your Dane-Elec router's IP address
Find Dane-Elec router ip on OSX
Open the OSX Terminal: Finder > Applications > Utilities > Terminal
Or you can press cmd+space and type terminal
Type the following command:
netstat -nr | grep defaultand press enter.
- Your Dane-Elec router default IP will be shown, something like 192.168.0.1