LB-LINK Default IP Address List
Info updated Jan. 4, 2023
Instructions to find your LB-LINK router's IP address
Most LB-LINK routers have a default IP address of 192.168.16.1.
The IP address is required when accessing the LB-LINK router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.
You can also check the instructions on how to figure out your LB-LINK router ip if you are connected to the router's network.
Our readers have reported that their LB-LINK router's have had the following IPs
(more common higher in list)
To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most LB-LINK routers use the same default usernames and passwords so you can also check the Default LB-LINK password list to try with that one.
LB-LINK default IP address List (Updated January 2023)
B-LINK BL-WR3000 default username & password
B-LINK BL-WR4000 default username & password
BL-W1200 default username & password
BL-WDR4600 default username & password
Instructions and common questions
How to find out your LB-LINK router gateway IP
In case you have changed your LB-LINK router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)
Find LB-LINK router ip on Windows
Press Win + r
A run prompt should open
cmdinto the input and press enter
A command prompt will open
Type the following into the command prompt:
ipconfig | findstr /i "Gateway"and click enter.
- Your Default gateway, probably something like 192.168.0.1, will show
Find LB-LINK router ip on Linux
- Open a terminal window (Shortcut on some distros: ctrl+alt+t)
Type the following:
ip route | grep defaultand press enter.
- You will be presented with your LB-LINK router's IP address
Find LB-LINK router ip on OSX
Open the OSX Terminal: Finder > Applications > Utilities > Terminal
Or you can press cmd+space and type terminal
Type the following command:
netstat -nr | grep defaultand press enter.
- Your LB-LINK router default IP will be shown, something like 192.168.0.1