LinkIt Smart Default IP Address List
Instructions to find your LinkIt Smart router's IP address

Info updated Jan. 24, 2020

Most LinkIt Smart routers have a default IP address of 192.168.100.1.

Pro tip: If you're already connected to the router's network you can use this tool to instantly see your LinkIt Smart router's ip address

The IP address is required when accessing the LinkIt Smart router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.

You can also check the instructions on how to figure out your LinkIt Smart router ip if you are connected to the router's network.

Our readers have reported that their LinkIt Smart router's have had the following IPs
(more common higher in list)

  • 192.168.1.1
  • 192.168.1.254

To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most LinkIt Smart routers use the same default usernames and passwords so you can also check the Default LinkIt Smart password list to try with that one.

Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.

LinkIt Smart default IP address List (Valid January 2020)

Model Default IP Netmask
7688
7688 default username & password
192.168.100.1   Open 255.255.255.0

Instructions and common questions

How to find out your LinkIt Smart router gateway IP

In case you have changed your LinkIt Smart router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)

Find LinkIt Smart router ip on Windows

  1. Press Win + r
    A run prompt should open
  2. Type cmd into the input and press enter
    A command prompt will open
  3. Type the following into the command prompt: ipconfig | findstr /i "Gateway" and click enter.
  4. Your Default gateway, probably something like 192.168.0.1, will show

Find LinkIt Smart router ip on Linux

  1. Open a terminal window (Shortcut on some distros: ctrl+alt+t)
  2. Type the following: ip route | grep default and press enter.
  3. You will be presented with your LinkIt Smart router's IP address

Find LinkIt Smart router ip on OSX

  1. Open the OSX Terminal: Finder > Applications > Utilities > Terminal
    Or you can press cmd+space and type terminal
  2. Type the following command: netstat -nr | grep default and press enter.
  3. Your LinkIt Smart router default IP will be shown, something like 192.168.0.1