Planet Default IP Address List
Instructions to find your Planet router's IP address

Info updated Nov. 22, 2020

Most Planet routers have a default IP address of

Pro tip: If you're already connected to the router's network you can use this tool to instantly see your Planet router's ip address

The IP address is required when accessing the Planet router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.

You can also check the instructions on how to figure out your Planet router ip if you are connected to the router's network.

Our readers have reported that their Planet router's have had the following IPs
(more common higher in list)


To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most Planet routers use the same default usernames and passwords so you can also check the Default Planet password list to try with that one.

Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.

Planet default IP address List (Valid November 2020)

Model Default IP Netmask
VC-230N default username & password   Open
WAP-4000 default username & password   Open
WDRT-750AC default username & password   Open
WNRT-617 v1
WNRT-617 v1 default username & password   Open
WNRT-617 v2
WNRT-617 v2 default username & password   Open
WNRT-627 v1 (??)
WNRT-627 v1 (??) default username & password   Open
WRT-410 default username & password   Open

Instructions and common questions

How to find out your Planet router gateway IP

In case you have changed your Planet router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)

Find Planet router ip on Windows

  1. Press Win + r
    A run prompt should open
  2. Type cmd into the input and press enter
    A command prompt will open
  3. Type the following into the command prompt: ipconfig | findstr /i "Gateway" and click enter.
  4. Your Default gateway, probably something like, will show

Find Planet router ip on Linux

  1. Open a terminal window (Shortcut on some distros: ctrl+alt+t)
  2. Type the following: ip route | grep default and press enter.
  3. You will be presented with your Planet router's IP address

Find Planet router ip on OSX

  1. Open the OSX Terminal: Finder > Applications > Utilities > Terminal
    Or you can press cmd+space and type terminal
  2. Type the following command: netstat -nr | grep default and press enter.
  3. Your Planet router default IP will be shown, something like