SeeedStudio Default IP Address List
Info updated Jan. 19, 2020
Instructions to find your SeeedStudio router's IP address
Most SeeedStudio routers have a default IP address of 192.168.7.2.
The IP address
is required when accessing the
SeeedStudio router's web interface
to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.
You can also check the instructions on how to figure out your SeeedStudio router ip if you are connected to the router's network.
To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most SeeedStudio routers use the same default usernames and passwords so you can also check the Default SeeedStudio password list to try with that one.
SeeedStudio default IP address List (Valid January 2020)
BeagleBone Green default username & password
BeagleBone Green Wireless
BeagleBone Green Wireless default username & password
LinkIt Smart 7688
LinkIt Smart 7688 default username & password
ReSpeaker Core default username & password
Instructions and common questions
How to find out your SeeedStudio router gateway IP
In case you have changed your SeeedStudio router's default IP address and can't remember it you can find it
out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)
Find SeeedStudio router ip on Windows
Press Win + r
A run prompt should open
cmdinto the input and press enter
A command prompt will open
Type the following into the command prompt:
ipconfig | findstr /i "Gateway"and click enter.
- Your Default gateway, probably something like 192.168.0.1, will show
Find SeeedStudio router ip on Linux
- Open a terminal window (Shortcut on some distros: ctrl+alt+t)
Type the following:
ip route | grep defaultand press enter.
- You will be presented with your SeeedStudio router's IP address
Find SeeedStudio router ip on OSX
Open the OSX Terminal: Finder > Applications > Utilities > Terminal
Or you can press cmd+space and type terminal
Type the following command:
netstat -nr | grep defaultand press enter.
- Your SeeedStudio router default IP will be shown, something like 192.168.0.1