SmartRG Default IP Address List

Info updated April 10, 2019

Most SmartRG routers have a default IP address of 192.168.1.1.
The IP address is required when accessing the SmartRG router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.

You can also check the instructions on how to figure out your SmartRG router ip if you're connected to the router's network, or use the following tool to automatically find your SmartRG router's ip address .

To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most SmartRG routers use the same default usernames and passwords so you can also check the Default SmartRG password list to try with that one.

Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.

SmartRG default IP address List (Valid April 2019)

Model Default IP Netmask
SR310N
SR310N default username & password
192.168.1.1   Open 255.255.255.0
SR400ac
SR400ac default username & password
192.168.1.1   Open 255.255.255.0
SR505N
SR505N default username & password
192.168.1.1   Open 255.255.255.0
SR550n
SR550n default username & password
192.168.1.1   Open 255.255.255.0
SR808ac
SR808ac default username & password
192.168.100.1   Open 255.255.255.0
SR900ac
SR900ac default username & password
192.168.1.1   Open 255.255.255.0
SR905ac
SR905ac default username & password
192.168.1.1   Open 255.255.255.0
WR100
WR100 default username & password
10.0.10.254   Open 255.255.255.0

Instructions and common questions

How to find out your SmartRG router gateway IP

In case you have changed your SmartRG router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)

Find SmartRG router ip on Windows

  1. Press Win + r
    A run prompt should open
  2. Type cmd into the input and press enter
    A command prompt will open
  3. Type the following into the command prompt: ipconfig | findstr /i "Gateway" and click enter.
  4. Your Default gateway, probably something like 192.168.0.1, will show

Find SmartRG router ip on Linux

  1. Open a terminal window (Shortcut on some distros: ctrl+alt+t)
  2. Type the following: ip route | grep default and press enter.
  3. You will be presented with your SmartRG router's IP address

Find SmartRG router ip on OSX

  1. Open the OSX Terminal: Finder > Applications > Utilities > Terminal
    Or you can press cmd+space and type terminal
  2. Type the following command: netstat -nr | grep default and press enter.
  3. Your SmartRG router default IP will be shown, something like 192.168.0.1