Xenon Default IP Address List
Instructions to find your Xenon router's IP address

Info updated Oct. 3, 2023

Most Xenon routers have a default IP address of 192.168.1.1.

Pro tip: If you're already connected to the router's network you can use this tool to instantly see your Xenon router's ip address

The IP address is required when accessing the Xenon router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.

You can also check the instructions on how to figure out your Xenon router ip if you are connected to the router's network.

Our readers have reported that their Xenon router's have had the following IPs
(more common higher in list)

  • 192.168.1.1
  • 192.168.0.254
  • 192.168.1.254

To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most Xenon routers use the same default usernames and passwords so you can also check the Default Xenon password list to try with that one.


Instructions and common questions

How to find out your Xenon router gateway IP

In case you have changed your Xenon router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)

Find Xenon router ip on Windows

  1. Press Win + r
    A run prompt should open
  2. Type cmd into the input and press enter
    A command prompt will open
  3. Type the following into the command prompt: ipconfig | findstr /i "Gateway" and click enter.
  4. Your Default gateway, probably something like 192.168.0.1, will show

Find Xenon router ip on Linux

  1. Open a terminal window (Shortcut on some distros: ctrl+alt+t)
  2. Type the following: ip route | grep default and press enter.
  3. You will be presented with your Xenon router's IP address

Find Xenon router ip on OSX

  1. Open the OSX Terminal: Finder > Applications > Utilities > Terminal
    Or you can press cmd+space and type terminal
  2. Type the following command: netstat -nr | grep default and press enter.
  3. Your Xenon router default IP will be shown, something like 192.168.0.1