iiNet Default IP Address List

Info updated Aug. 15, 2018

Most iiNet routers have a default IP address of None.
The IP address is required when accessing the iiNet router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.

You can also check the instructions on how to figure out your iiNet router ip if you're connected to the router's network, or use the following tool to automatically find your iiNet router's ip address .

To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most iiNet routers use the same default usernames and passwords so you can also check the Default iiNet password list to try with that one.

Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.

iiNet default IP address List (Valid August 2018)

Model Default IP Netmask

Instructions and common questions

How to find out your iiNet router gateway IP

In case you have changed your iiNet router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)

Find iiNet router ip on Windows

  1. Press Win + r
    A run prompt should open
  2. Type cmd into the input and press enter
    A command prompt will open
  3. Type the following into the command prompt: ipconfig | findstr /i "Gateway" and click enter.
  4. Your Default gateway, probably something like, will show

Find iiNet router ip on Linux

  1. Open a terminal window (Shortcut on some distros: ctrl+alt+t)
  2. Type the following: ip route | grep default and press enter.
  3. You will be presented with your iiNet router's IP address

Find iiNet router ip on OSX

  1. Open the OSX Terminal: Finder > Applications > Utilities > Terminal
    Or you can press cmd+space and type terminal
  2. Type the following command: netstat -nr | grep default and press enter.
  3. Your iiNet router default IP will be shown, something like