TEW-825DAP v1.0R
AC1750 Dual Band PoE Access Point

The TRENDnet TEW-825DAP v1.0R router has Gigabit WiFi, 1 N/A ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1750 Mpbs.
It is also known as the TRENDnet AC1750 Dual Band PoE Access Point.

Quick links:
Default password/Login


TEW-825DAP v1.0R router specifications (specs)

System specs
CPU: 750 MHz
RAM: 128 MiB
Flash: 16 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: 1750 Mpbs
WAN: None
ETH: 1 x N/A port
USB-ports: 0

TRENDnet TEW-825DAP review (quick overview)

Here is the quick comparison of how the TRENDnet TEW-825DAP compares to other routers on our site:

Average 42/100
Editor 74/100
WiFi 35/100
Hardware 19/100
Current price $134.65

For a full list of routers and how they compare to the TEW-825DAP v1.0R, check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for TRENDnet TEW-825DAP v1.0R

If your TEW-825DAP v1.0R router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your TRENDnet TEW-825DAP v1.0R in the following way(s):

With the reset button

  1. Have the unit plugged in and powered on
  2. Press and hold the reset button for 15 seconds (use a sharp pencil or a paperclip)
  3. Wait for the router to reboot

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for TRENDnet TEW-825DAP v1.0R

If you have performed a reset of your TEW-825DAP v1.0R device or not changed the defaults, you should be able to access it with the following settings:

Default Network name (SSID): TRENDnet825_2.4GHz_XYXYXYX
Default username: admin TRENDnet router default password list
Default password: admin 
Default subnet mask: 255.255.255.0

Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

TEW-825DAP v1.0R Firmwares

Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the TRENDnet TEW-825DAP v1.0R:

TRENDnet stock firmware for the TEW-825DAP v1.0R

Stock firmwares for the TEW-825DAP v1.0R are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.




Report error on page
(If info is incorrect)