AMX Default IP Address List
Instructions to find your AMX router's IP address

Info updated Sept. 1, 2020

Most AMX routers have a default IP address of 192.168.1.240.

Pro tip: If you're already connected to the router's network you can use this tool to instantly see your AMX router's ip address

The IP address is required when accessing the AMX router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.

You can also check the instructions on how to figure out your AMX router ip if you are connected to the router's network.

Our readers have reported that their AMX router's have had the following IPs
(more common higher in list)

  • 192.168.1.1
  • 192.168.0.1
  • 192.168.2.10

To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most AMX routers use the same default usernames and passwords so you can also check the Default AMX password list to try with that one.

Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.

AMX default IP address List (Valid September 2020)

Model Default IP Netmask
NXA-WAP200G
NXA-WAP200G default username & password
192.168.1.240   Open 255.255.255.0
NXA-WAP250G
NXA-WAP250G default username & password
192.168.1.240   Open 255.255.255.0

Instructions and common questions

How to find out your AMX router gateway IP

In case you have changed your AMX router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)

Find AMX router ip on Windows

  1. Press Win + r
    A run prompt should open
  2. Type cmd into the input and press enter
    A command prompt will open
  3. Type the following into the command prompt: ipconfig | findstr /i "Gateway" and click enter.
  4. Your Default gateway, probably something like 192.168.0.1, will show

Find AMX router ip on Linux

  1. Open a terminal window (Shortcut on some distros: ctrl+alt+t)
  2. Type the following: ip route | grep default and press enter.
  3. You will be presented with your AMX router's IP address

Find AMX router ip on OSX

  1. Open the OSX Terminal: Finder > Applications > Utilities > Terminal
    Or you can press cmd+space and type terminal
  2. Type the following command: netstat -nr | grep default and press enter.
  3. Your AMX router default IP will be shown, something like 192.168.0.1