Adaptec Default IP Address List

Info updated Aug. 15, 2018

Most Adaptec routers have a default IP address of 192.168.8.1.
The IP address is required when accessing the Adaptec router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.

You can also check the instructions on how to figure out your Adaptec router ip if you're connected to the router's network, or use the following tool to automatically find your Adaptec router's ip address .

To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most Adaptec routers use the same default usernames and passwords so you can also check the Default Adaptec password list to try with that one.

Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.

Adaptec default IP address List (Valid August 2018)

Model Default IP Netmask
AWN-8084
AWN-8084 default username & password
192.168.8.1   Open 255.255.255.0

Instructions and common questions

How to find out your Adaptec router gateway IP

In case you have changed your Adaptec router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)

Find Adaptec router ip on Windows

  1. Press Win + r
    A run prompt should open
  2. Type cmd into the input and press enter
    A command prompt will open
  3. Type the following into the command prompt: ipconfig | findstr /i "Gateway" and click enter.
  4. Your Default gateway, probably something like 192.168.0.1, will show

Find Adaptec router ip on Linux

  1. Open a terminal window (Shortcut on some distros: ctrl+alt+t)
  2. Type the following: ip route | grep default and press enter.
  3. You will be presented with your Adaptec router's IP address

Find Adaptec router ip on OSX

  1. Open the OSX Terminal: Finder > Applications > Utilities > Terminal
    Or you can press cmd+space and type terminal
  2. Type the following command: netstat -nr | grep default and press enter.
  3. Your Adaptec router default IP will be shown, something like 192.168.0.1