CyberTAN Default IP Address List

Info updated Jan. 10, 2019

Most CyberTAN routers have a default IP address of 192.168.1.1.
The IP address is required when accessing the CyberTAN router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.

You can also check the instructions on how to figure out your CyberTAN router ip if you're connected to the router's network, or use the following tool to automatically find your CyberTAN router's ip address .

To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most CyberTAN routers use the same default usernames and passwords so you can also check the Default CyberTAN password list to try with that one.

Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.

CyberTAN default IP address List (Valid January 2019)

Model Default IP Netmask
WG-414B1
WG-414B1 default username & password
192.168.1.1   Open 255.255.255.0
WG214-K
WG214-K default username & password
192.168.1.1   Open 255.255.255.0
WG214A
WG214A default username & password
192.168.1.1   Open 255.255.255.0
WGV614-A3
WGV614-A3 default username & password
192.168.15.1   Open 255.255.255.0
WR114
WR114 default username & password
192.168.1.1   Open 255.255.255.0
WR214C
WR214C default username & password
192.168.1.1   Open 255.255.255.0
WR214E
WR214E default username & password
192.168.1.1   Open 255.255.255.0

Instructions and common questions

How to find out your CyberTAN router gateway IP

In case you have changed your CyberTAN router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)

Find CyberTAN router ip on Windows

  1. Press Win + r
    A run prompt should open
  2. Type cmd into the input and press enter
    A command prompt will open
  3. Type the following into the command prompt: ipconfig | findstr /i "Gateway" and click enter.
  4. Your Default gateway, probably something like 192.168.0.1, will show

Find CyberTAN router ip on Linux

  1. Open a terminal window (Shortcut on some distros: ctrl+alt+t)
  2. Type the following: ip route | grep default and press enter.
  3. You will be presented with your CyberTAN router's IP address

Find CyberTAN router ip on OSX

  1. Open the OSX Terminal: Finder > Applications > Utilities > Terminal
    Or you can press cmd+space and type terminal
  2. Type the following command: netstat -nr | grep default and press enter.
  3. Your CyberTAN router default IP will be shown, something like 192.168.0.1