Sagemcom Default IP Address ListInfo updated Feb. 9, 2019
Most Sagemcom routers have a default
IP address of 192.168.1.1.
The IP address is required when accessing the Sagemcom router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.
You can also check the instructions on how to figure out your Sagemcom router ip if you're connected to the router's network, or use the following tool to automatically find your Sagemcom router's ip address .
To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most Sagemcom routers use the same default usernames and passwords so you can also check the Default Sagemcom password list to try with that one.Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.
Sagemcom default IP address List (Valid February 2019)
F@ST 1704 default username & password
F@ST 2704R default username & password
F@ST 2804 v5
F@ST 2804 v5 default username & password
F@ST 3686 default username & password
F@ST 5250 default username & password
SE567 (Frontier Communications)
SE567 (Frontier Communications) default username & password
Instructions and common questions
How to find out your Sagemcom router gateway IP
In case you have changed your Sagemcom router's default IP address and can't remember it you can find it
out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)
Find Sagemcom router ip on Windows
Press Win + r
A run prompt should open
cmdinto the input and press enter
A command prompt will open
Type the following into the command prompt:
ipconfig | findstr /i "Gateway"and click enter.
- Your Default gateway, probably something like 192.168.0.1, will show
Find Sagemcom router ip on Linux
- Open a terminal window (Shortcut on some distros: ctrl+alt+t)
Type the following:
ip route | grep defaultand press enter.
- You will be presented with your Sagemcom router's IP address
Find Sagemcom router ip on OSX
Open the OSX Terminal: Finder > Applications > Utilities > Terminal
Or you can press cmd+space and type terminal
Type the following command:
netstat -nr | grep defaultand press enter.
- Your Sagemcom router default IP will be shown, something like 192.168.0.1