Strix Systems Default IP Address List
Instructions to find your Strix Systems router's IP address

Info updated June 12, 2019

Most Strix Systems routers have a default IP address of 192.168.1.250.

Pro tip: If you're already connected to the router's network you can use this tool to instantly see your Strix Systems router's ip address

The IP address is required when accessing the Strix Systems router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.

You can also check the instructions on how to figure out your Strix Systems router ip if you are connected to the router's network.

To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most Strix Systems routers use the same default usernames and passwords so you can also check the Default Strix Systems password list to try with that one.

Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.

Strix Systems default IP address List (Valid June 2019)

Model Default IP Netmask
EWS-100
EWS-100 default username & password
192.168.1.250   Open 255.255.255.0
EWS-150g
EWS-150g default username & password
169.254.1.250   Open 255.255.255.0

Instructions and common questions

How to find out your Strix Systems router gateway IP

In case you have changed your Strix Systems router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)

Find Strix Systems router ip on Windows

  1. Press Win + r
    A run prompt should open
  2. Type cmd into the input and press enter
    A command prompt will open
  3. Type the following into the command prompt: ipconfig | findstr /i "Gateway" and click enter.
  4. Your Default gateway, probably something like 192.168.0.1, will show

Find Strix Systems router ip on Linux

  1. Open a terminal window (Shortcut on some distros: ctrl+alt+t)
  2. Type the following: ip route | grep default and press enter.
  3. You will be presented with your Strix Systems router's IP address

Find Strix Systems router ip on OSX

  1. Open the OSX Terminal: Finder > Applications > Utilities > Terminal
    Or you can press cmd+space and type terminal
  2. Type the following command: netstat -nr | grep default and press enter.
  3. Your Strix Systems router default IP will be shown, something like 192.168.0.1