Synology Default IP Address List
Info updated June 2, 2023
Instructions to find your Synology router's IP address
Most Synology routers have a default IP address of 192.168.1.1.
The IP address is required when accessing the Synology router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.
You can also check the instructions on how to figure out your Synology router ip if you are connected to the router's network.
Our readers have reported that their Synology router's have had the following IPs
(more common higher in list)
To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most Synology routers use the same default usernames and passwords so you can also check the Default Synology password list to try with that one.
Synology default IP address List (Updated June 2023)
RT1900ac default username & password
RT2600ac default username & password
RT6600ax default username & password
Instructions and common questions
How to find out your Synology router gateway IP
In case you have changed your Synology router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)
Find Synology router ip on Windows
Press Win + r
A run prompt should open
cmdinto the input and press enter
A command prompt will open
Type the following into the command prompt:
ipconfig | findstr /i "Gateway"and click enter.
- Your Default gateway, probably something like 192.168.0.1, will show
Find Synology router ip on Linux
- Open a terminal window (Shortcut on some distros: ctrl+alt+t)
Type the following:
ip route | grep defaultand press enter.
- You will be presented with your Synology router's IP address
Find Synology router ip on OSX
Open the OSX Terminal: Finder > Applications > Utilities > Terminal
Or you can press cmd+space and type terminal
Type the following command:
netstat -nr | grep defaultand press enter.
- Your Synology router default IP will be shown, something like 192.168.0.1