WRTnode Default IP Address List
Instructions to find your WRTnode router's IP address

Info updated Jan. 19, 2020

Most WRTnode routers have a default IP address of

Pro tip: If you're already connected to the router's network you can use this tool to instantly see your WRTnode router's ip address

The IP address is required when accessing the WRTnode router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.

You can also check the instructions on how to figure out your WRTnode router ip if you are connected to the router's network.

To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most WRTnode routers use the same default usernames and passwords so you can also check the Default WRTnode password list to try with that one.

Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.

WRTnode default IP address List (Valid January 2020)

Model Default IP Netmask
2Q default username & password   Open
2R default username & password   Open
7 default username & password   Open

Instructions and common questions

How to find out your WRTnode router gateway IP

In case you have changed your WRTnode router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)

Find WRTnode router ip on Windows

  1. Press Win + r
    A run prompt should open
  2. Type cmd into the input and press enter
    A command prompt will open
  3. Type the following into the command prompt: ipconfig | findstr /i "Gateway" and click enter.
  4. Your Default gateway, probably something like, will show

Find WRTnode router ip on Linux

  1. Open a terminal window (Shortcut on some distros: ctrl+alt+t)
  2. Type the following: ip route | grep default and press enter.
  3. You will be presented with your WRTnode router's IP address

Find WRTnode router ip on OSX

  1. Open the OSX Terminal: Finder > Applications > Utilities > Terminal
    Or you can press cmd+space and type terminal
  2. Type the following command: netstat -nr | grep default and press enter.
  3. Your WRTnode router default IP will be shown, something like