Zinwell Default IP Address List
Info updated March 28, 2022
Instructions to find your Zinwell router's IP address
Most Zinwell routers have a default IP address of 10.10.10.253.
The IP address
is required when accessing the
Zinwell router's web interface
to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.
You can also check the instructions on how to figure out your Zinwell router ip if you are connected to the router's network.
Our readers have reported that their Zinwell router's have had the following IPs
(more common higher in list)
To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most Zinwell routers use the same default usernames and passwords so you can also check the Default Zinwell password list to try with that one.
Zinwell default IP address List (Valid March 2022)
PWQ-5101 default username & password
PWQ-5121 default username & password
PWS-8121 default username & password
Instructions and common questions
How to find out your Zinwell router gateway IP
In case you have changed your Zinwell router's default IP address and can't remember it you can find it
out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)
Find Zinwell router ip on Windows
Press Win + r
A run prompt should open
cmdinto the input and press enter
A command prompt will open
Type the following into the command prompt:
ipconfig | findstr /i "Gateway"and click enter.
- Your Default gateway, probably something like 192.168.0.1, will show
Find Zinwell router ip on Linux
- Open a terminal window (Shortcut on some distros: ctrl+alt+t)
Type the following:
ip route | grep defaultand press enter.
- You will be presented with your Zinwell router's IP address
Find Zinwell router ip on OSX
Open the OSX Terminal: Finder > Applications > Utilities > Terminal
Or you can press cmd+space and type terminal
Type the following command:
netstat -nr | grep defaultand press enter.
- Your Zinwell router default IP will be shown, something like 192.168.0.1