router LPV4-U2-300S print

The Buffalo LPV4-U2-300S router has 300mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.

Quick links:
Default password/Login
User Manuals

LPV4-U2-300S router specifications (specs)

System specs
Cpu: 300 MHz
RAM: 32 MiB
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands: 2.4GHz
WAN: None
ETH: 1 100mbps port
USB-ports: 0

Hard reset instructions for Buffalo LPV4-U2-300S

If your LPV4-U2-300S router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Buffalo LPV4-U2-300S in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.
Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for Buffalo LPV4-U2-300S

If you have performed a reset of your LPV4-U2-300S device or not changed the defaults, you should be able to access it with the following settings:

Default Network name (SSID): LPV4-U2-XXXXXX
Default Gateway IP: acquired via DHCP Buffalo login instructions
Default username: admin Buffalo router default password list
Default password: password 
Default subnet mask: 255.255.255.0
Default DNS server: acquired via DHCP
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

User Manuals for LPV4-U2-300S

Do you still have questions concerning the router that you can't find online? You can always try the manuals where most questions should be answered from the manufacturer. Below are the device manuals available for your LPV4-U2-300S.

Name Type Size Date
save Users Manual (click to download) pdf 2.83 MB Sept. 26, 2013