DAP-1560 print

Router info

OpenWrt supported: no
dd-wrt supported: no
WiFi: 300mbps (abgn)
ETH-ports (LAN): 1
ETH-speed: Gigabit (10/100/1000)
USB-ports: no

Hard reset instructions for D-Link DAP-1560

With the reset button

  1. Locate the reset button on the back off the router
  2. While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
  3. Hold the button pressed for 10 seconds, then release.
  4. The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
  5. You can now setup your router again through the user interface

The 30-30-30 reset

If the above instructions don't work you can always try the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
This process usually works for resetting any router to it's factory setting

Default factory settings

Default Gateway IP: 192.168.0.50
Default admin username: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.50

User Manuals for DAP-1560

Name Type Size Date
save User Manual Part 2 (click to download) pdf 0.59 MB July 12, 2010
save User Manual Part 1 (click to download) pdf 3.58 MB July 12, 2010
Cookies disclaimer

I agree Our site saves small pieces of text information (cookies) on your device in order to deliver better content and for statistical purposes. You can disable the usage of cookies by changing the settings of your browser. By browsing our website without changing the browser settings you grant us permission to store that information on your device.