router DIR-605 rev D1 print

The D-Link DIR-605 rev D1 router has 300mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.

Quick links:
Default password/Login
User Manuals

Other versions (newest first):
  • DIR-605 rev B1 (2008)
  • DIR-605 rev A2 (2008)
  • DIR-605 rev D1 router specifications (specs)

    System specs
    Cpu: n/a
    RAM: 32 MiB
    Flash: 4 MiB
    Custom firmwares: None
    WiFi: 300mbps (bgn)
    WAN-ports: 1
    WAN-speed: 100mbps (10/100)
    ETH-ports (LAN): 4
    ETH-speed: 100mbps (10/100)
    USB-ports: 0

    Hard reset instructions for D-Link DIR-605 rev D1

    If your DIR-605 rev D1 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
    Your can reset your D-Link DIR-605 rev D1 in the following way(s):

    With the reset button

    1. Locate the reset button on the back off the router
    2. While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
    3. Hold the button pressed for 10 seconds, then release.
    4. The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
    5. You can now setup your router again through the user interface

    The 30-30-30 reset

    If the above instructions don't work you can always try the 30-30-30 reset as follows:
    1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
    2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
    3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

    This process usually works for resetting any router to it's factory setting.
    Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

    Default factory settings for D-Link DIR-605 rev D1

    If you have performed a reset of your DIR-605 rev D1 device or not changed the defaults, you should be able to access it with the following settings:

    Default Gateway IP:
    Default username: admin
    Default subnet mask:
    Default DNS server:
    Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

    User Manuals for DIR-605 rev D1

    Do you still have questions concerning the router that you can't find online? You can always try the manuals where most questions should be answered from the manufacturer. Below are the device manuals available for your DIR-605 rev D1.

    Name Type Size Date
    save User manual (click to download) pdf 2.98 MB Oct. 5, 2009