The 2Wire HomePortal 1000HW router has 11mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.
HomePortal 1000HW router specifications (specs)
RAM: 32 MiB
Flash: 16 MiB
Custom firmwares: None
WiFi: 11mbps (b)
WiFi bands: 2.4GHz
WiFi throughput: n/a
ETH: 1 x 100mbps port
Hard reset instructions for 2Wire HomePortal 1000HW
If your HomePortal 1000HW router is not working as it should, dropping connections or not
responsive, you should first do a reset of the router to see if the problems persist. Other
scenarios where you might want to reset your router is if you've forgotten the password or
misconfigured it and can't get access anymore.
Your can reset your 2Wire HomePortal 1000HW in the following way(s):
The 30-30-30 resetThere are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
- When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
- While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
- While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
This process usually works for resetting any router to it's factory setting.
Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.
Default factory settings for 2Wire HomePortal 1000HW
If you have performed a reset of your HomePortal 1000HW device or not changed the defaults, you should be able to access it with the following settings:
Default Gateway IP: 172.16.0.1 2Wire login instructions
Default subnet mask: 255.255.255.0
Default DNS server: 172.16.0.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.
HomePortal 1000HW Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the 2Wire HomePortal 1000HW:
2Wire stock firmware for the HomePortal 1000HW
Stock firmwares for the HomePortal 1000HW are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.
Report error on page
(If info is incorrect)