AP600EX

The Amped Wireless AP600EX router has 300mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.

Quick links:
Default password/Login
User Manuals


AP600EX router specifications (specs)

System specs
CPU: n/a
RAM: n/a
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands: 2.4GHz
WiFi throughput: n/a
WAN: None
ETH: 1 x 100mbps port
USB-ports: 0

Amped Wireless AP600EX review (quick overview)

Here is the quick comparison of how the Amped Wireless AP600EX compares to other routers on our site:

Average 19/100
Editor 50/100
WiFi 6/100
Hardware 1/100
Current price $45.95

For a full list of routers and how they compare to the AP600EX, check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for Amped Wireless AP600EX

If your AP600EX router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Amped Wireless AP600EX in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for Amped Wireless AP600EX

If you have performed a reset of your AP600EX device or not changed the defaults, you should be able to access it with the following settings:

Default Network name (SSID): Amped_Pro_AP
Default Gateway IP: 192.168.1.240 Amped Wireless login instructions
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.240
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

AP600EX Firmwares

Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Amped Wireless AP600EX:

Amped Wireless stock firmware for the AP600EX

Stock firmwares for the AP600EX are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.




Report error on page
(If info is incorrect)