Wireless 802.11AC DSL Residential Gateway
The Arris NVG448B router has Gigabit WiFi, 4 N/A ETH-ports and 0 USB-ports.
It is also known as the Arris Wireless 802.11AC DSL Residential Gateway.
Best Low-end routers: buying guide
NVG448B router specifications (specs)
CPU: 1 GHz
RAM: 512 MiB
Flash: 32 MiB
Custom firmwares: None
WiFi: Gigabit (abgn+ac)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: n/a
WAN: 1 x N/A port
ETH: 4 x N/A ports
Arris NVG448 review (quick overview)
Here is the quick comparison of how the Arris NVG448 compares to other routers on our site:
For a full list of routers and how they compare to the NVG448B, check the Router Buying Guide which will help you buy the most price-competitive router.
Hard reset instructions for Arris NVG448B
If your NVG448B router is not working as it should, dropping connections or not
responsive, you should first do a reset of the router to see if the problems persist. Other
scenarios where you might want to reset your router is if you've forgotten the password or
misconfigured it and can't get access anymore.
Your can reset your Arris NVG448B in the following way(s):
The 30-30-30 resetThere are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
- When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
- While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
- While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
This process usually works for resetting any router to it's factory setting.
If that doesn't work be sure to check out the
questions and answers
incase someone else has had similar problems resetting their router.
Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.
Default factory settings for Arris NVG448B
If you have performed a reset of your NVG448B device or not changed the defaults, you should be able to access it with the following settings:
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.
Report error on page
(If info is incorrect)