GL-MV1000 (Brume)

The GL.iNet GL-MV1000 (Brume) router has No WiFi, 2 N/A ETH-ports and 0 USB-ports.

The GL-MV1000 (Brume) is featured in our
Best Low-end routers: buying guide

Quick links:
Default password/Login
Login instructions



GL-MV1000 (Brume) router specifications (specs)

System specs
CPU: 1.0 GHz
RAM: 1,024 MiB
Flash: 16 MiB + 8,192 MiB
Custom firmwares: None
Connectivity
WiFi: No ()
WiFi bands: n/a
WiFi throughput: n/a
WAN: 1 x N/A port
ETH: 2 x N/A ports
USB-ports: 0

GL.iNet GL-MV1000 review (quick overview)

Here is the quick comparison of how the GL.iNet GL-MV1000 compares to other routers on our site:

Average 57/100
Editor 88/100
WiFi 2/100
Hardware 83/100
Current price Find best price

For a full list of routers and how they compare to the GL-MV1000 (Brume), check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for GL.iNet GL-MV1000 (Brume)

If your GL-MV1000 (Brume) router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your GL.iNet GL-MV1000 (Brume) in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:
  1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  2. While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
  3. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.


Default factory settings for GL.iNet GL-MV1000 (Brume)

If you have performed a reset of your GL-MV1000 (Brume) device or not changed the defaults, you should be able to access it with the following settings:

Default Gateway IP: 192.168.8.1 GL.iNet login instructions
Default username: root
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.8.1
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

How to login to the GL-MV1000 (Brume)

To login to the GL-MV1000 (Brume) router and change the settings, you can follow these steps:

  1. Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
  2. Open your browser and visit http://192.168.8.1
  3. You should be prompted with a login dialogue.
  4. Enter the username: root and if it requires a password, leave it empty or try with admin/password
    Note: If you have already changed the password use that instead.
  5. You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.

If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common GL.iNet credentials, as they can usually be shared across models/variants.




Report error on page
(If info is incorrect)