Ubee Default IP Address List
Info updated April 16, 2021
Instructions to find your Ubee router's IP address
Most Ubee routers have a default IP address of 192.168.100.1.
The IP address
is required when accessing the
Ubee router's web interface
to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.
You can also check the instructions on how to figure out your Ubee router ip if you are connected to the router's network.
Our readers have reported that their Ubee router's have had the following IPs
(more common higher in list)
To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most Ubee routers use the same default usernames and passwords so you can also check the Default Ubee password list to try with that one.
Ubee default IP address List (Valid April 2021)
60678EU (U10C011) default username & password
DDW2600 default username & password
DDW2602 default username & password
U10C019 default username & password
U10C022 default username & password
UBC1302-BA00 default username & password
Instructions and common questions
How to find out your Ubee router gateway IP
In case you have changed your Ubee router's default IP address and can't remember it you can find it
out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)
Find Ubee router ip on Windows
Press Win + r
A run prompt should open
cmdinto the input and press enter
A command prompt will open
Type the following into the command prompt:
ipconfig | findstr /i "Gateway"and click enter.
- Your Default gateway, probably something like 192.168.0.1, will show
Find Ubee router ip on Linux
- Open a terminal window (Shortcut on some distros: ctrl+alt+t)
Type the following:
ip route | grep defaultand press enter.
- You will be presented with your Ubee router's IP address
Find Ubee router ip on OSX
Open the OSX Terminal: Finder > Applications > Utilities > Terminal
Or you can press cmd+space and type terminal
Type the following command:
netstat -nr | grep defaultand press enter.
- Your Ubee router default IP will be shown, something like 192.168.0.1