Arris Default Usernames & Passwords
The default credentials needed to login to your Arris router
Info updated Sept. 27, 2024
The majority of Arris routers have a default username of admin
, a default password of password
, and the default IP address of 192.168.0.1
.
These Arris credentials are needed when doing a login to the Arris router's web interface to change any settings.
Since some of the models don't follow the standards, you can see those in the table below.
Below the table are also instructions on what to do incase you forget your Arris router password, need to reset your Arris router to its factory default password, or the password reset doesn't work.
Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.Arris default Password List (Valid September 2024)
Model | Default Username | Default Password | Default IP address |
DG3450 DG3450 default factory settings |
admin | password | 192.168.0.1 |
DG860P2 DG860P2 default factory settings |
admin | password | 192.168.0.1 |
DG950A DG950A default factory settings |
admin | password | 192.168.0.1 |
SB8200 SB8200 default factory settings |
admin | password | 192.168.100.1 |
SBG10 SBG10 default factory settings |
admin | password | 192.168.0.1 |
SBG6700-AC SBG6700-AC default factory settings |
admin | password | 192.168.0.1 |
SBG6900-AC SBG6900-AC default factory settings |
admin | password | 192.168.0.1 |
SBG8300 SBG8300 default factory settings |
admin | password | - |
SBR-AC1750 SBR-AC1750 default factory settings |
- | password | 192.168.0.1 |
SBR-AC1900P SBR-AC1900P default factory settings |
admin | password | 192.168.0.1 |
|
|||
SBR-AC3200P SBR-AC3200P default factory settings |
admin | password | 192.168.0.1 |
TG1672G TG1672G default factory settings |
admin | password | 192.168.100.1 |
TG1682G TG1682G default factory settings |
admin | password | 10.0.0.1 |
VAP4641 VAP4641 default factory settings |
admin | - | 192.168.1.253 |
WR2100 WR2100 default factory settings |
admin | password | - |
Instructions and common questions
Forgot your Arris router password?
Have you changed the username and/or password of your Arris router and forgotten what you changed it to?
Don't worry: all Arris routers come with a default factory set password that you can revert to by following the instructions below.
Reset Arris router to default password
If you decide to revert your Arris router to it's factory defaults, you should do the 30-30-30 reset as follows:
- When your Arris router is powered on, press and hold the reset button for 30 seconds.
- While still holding the reset button pressed, unplug the power of the router and hold the reset button for another 30 seconds
- While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
Your Arris router should now be reset to its brand new factory settings, Check the table to see what those are (Most likely admin
/password
).
If the factory reset didn't work, check out the Arris 30 30 30 factory reset guide .
Important: Remember to change the default username and password to increase the security of your router after the factory reset, as the default passwords are available all over the web (like here).
I still can't access my Arris router with the default password
Make sure that you have followed the reset instructions correctly as the Arris routers should always rever to their factory default settings when reset.
Otherwise, there is always the risk that your router is damaged and might need to be repaired or replaced.